TWINTIPS

P2120078.JPG

DSD

 

OOS

Freeride

SIZES

135 x 41   -   140 x 42   -   145x43

Riding characteristics

 

The flex of the board is engineered. There is a bump in the middle of the board on the deck peak of the core thickness taper. This keeps the rocker flatter between feet while riding and focuses the flex in the tips where it belongs.  
 

The shape of the board makes it very versatile and user friendly as the rails taper at the tips and outline become straighter in the foot area. This allows for maximum bite and edging capabilities while remaining all round for any type of condition. Comfortable and smooth easy ride, it requires minimal effort. 
 

The flex and the pop of this board make it an all-purpose weapon, comfortable in freestyle and freeride riding while also being a hard hacker in the waves… 

Shape

Single concave throughout with pressed channels in the tips. Rocker is between 41 and 49mm depending on the size of the board. The outline is from many years of experience and feedback. A compounding curve through the standing area into the tips. Softer edges right at the tips for better release in turns and carves. 

Construction 

Our Core is Pacific Albus Wood. Vertically laminated. Can be compared with Poplar species but lighter and stronger. 
Bottom Glass: 600gr 0’ X 90’ Biax. Top Glass: -45’ X +45’ 420gr Biax.  

 

Centerline rocker strip of glass on the top. This stops any reverse flex.  

 

Flex of the board is engineered. There is a ridge in the middle of the board on the deck peak of the core thickness taper. This keeps the rocker flatter between feet while riding and focuses the flex in the tips where it belongs , acting the same way as pre-stressed concrete does.  

Sidewalls are poured urethane shore A 95 durometer hardness. WILL NOT SOFTEN IN HEAT like competitors using cheap Chinese Urethanes. This adds extra durability, protecting the wood against perforation and water infiltration due to shocks on the rails. Compared to ABS, urethane also helps having a better flex along the board rail. 

 

Fin holes are also poured urethane.

IMG_5905.JPG

HYDE

 

LWR

LIGHTWIND/RACE

SIZES

135 x 41   -   140 x 42   -   145x43

Riding characteristics

 

The flex of the board is engineered. There is a bump in the middle of the board on the deck peak of the core thickness taper. This keeps the rocker flatter between feet while riding and focuses the flex in the tips where it belongs.

The shape of the board is designed for Light wind, Fast Planning and Upwind ability. The rails are thin and straight. This allows for maximum bite and edging, the surface area keep the speed and handling…

Shape

Light Wind Shape - Single concave throughout with pressed channels in the tips. Rocker is between 21 and 35mm depending on the size of the board. The outline is from many years of experience and feedback from big riders and light Winds.


The outline is broad keeping straight through 2/3rds and a slow taper past the feet. The “Edge Curve” technology is a release point at the very tips to make the board more forgiving when reaching and landing jumps. 

Construction 

Our Core is Pacific Albus Wood. Vertically laminated. Can be compared with Poplar species but lighter and stronger. 
Bottom Glass: 600gr 0’ X 90’ Biax. Top Glass: -45’ X +45’ 420gr Biax.  

 

Centerline rocker strip of glass on the top. This stops any reverse flex.  

 

Flex of the board is engineered. There is a ridge in the middle of the board on the deck peak of the core thickness taper. This keeps the rocker flatter between feet while riding and focuses the flex in the tips where it belongs , acting the same way as pre-stressed concrete does.  

Sidewalls are poured urethane shore A 95 durometer hardness. WILL NOT SOFTEN IN HEAT like competitors using cheap Chinese Urethanes. This adds extra durability, protecting the wood against perforation and water infiltration due to shocks on the rails. Compared to ABS, urethane also helps having a better flex along the board rail. 

 

Fin holes are also poured urethane.

Legendary Directional Kitesurf Boards by DSDMFG

  • All new Veneer technology

  • HD foam

  • Innegra core biaxial stabilisers

  • Light weight with flex!

Matt_Tobin_Kitesurfing_Waves_Stallion.jp

Australian Champ Matt Tobin

CURRENT MODELS

DROID – 2021

The Droid is our go to board for average conditions. It’s fun boxy shape cuts hard upwind, is super easy to punt and pull off crazy aerials or slide the tail our like a boss.
Nick named “The Stallion” this board will give your wave kiting some balls! Ride it as a thruster for more traditional carve turns or a quad for airs, critical barrels and tail slides.

Available in:

5’2” X 17” 7/8” X 2” = 22.15LTR
5’4” X 18 5/16” X 2 1/8” = 24.15LTR
5’6” X 19” X 2 1/5” = 27.06LTR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DSDMFG-BOARDS-DROID_edited.jpg

CHARGER – 2021

Your local is firing! Time to get out the gun… With a more refined tail for big smooth turns, and steeper rocker to take those drops, this board is aimed at the Kiter who is scoring good waves 2-6 ft, but still wants to toy with a freestyle element with airs and tail slides.

 

Available in:

5’1” X 17” 3/4 X 2” = 21.35LTR,
5’3” X 17” 7/8 X 2” = 22.25LTR,
5’5” X 18” 1/4 X 2” 1/16 = 24.25LTR

COMING SOON...

 

TEMPEST (L8R) – 2021

5’1” X 17” 7/8 X 2” = 22.05LTR
5’3” X 18” 3/16 X 2” 1/8 = 23.85LTR

ZONE – 2021 (TRADITIONAL SURFBOARD SHAPE)

5’9” X 17” 7/8 X 2” 5/16 = 25.75LTR

GET IN TOUCH TO ENQUIRE MORE ON THE DSD PRODUCT RANGE AND PLACING AN ORDER.