DSD LWR Freeride
DSD LWR Freeride
HYDE LIGHT WIND RACE
Our Core is Pacific Albus Wood. Vertically laminated. Can be compared with Poplar species but lighter and stronger.
Bottom Glass: 600gr 0’ X 90’ Biax. Top Glass: -45’ X +45’ 420gr Biax.
Centerline rocker strip of glass on the top -> This stops any reverse flex.
Flex of the board is engineered. There is a ridge in the middle of the board on the deck peak of the core thickness taper. This keeps the rocker flatter between feet while riding and focuses the flex in the tips where it belongs , acting the same way as pre-stressed concrete does.
Sidewalls are poured urethane shore A 95 durometer hardness. WILL NOT SOFTEN IN HEAT like competitors using cheap Chinese Urethanes. This adds extra durability, protecting the wood against perforation and water infiltration due to shocks on the rails. Compared to ABS, urethane also helps having a better flex along the board rail.
Fin holes are also poured urethane.
Light Wind Shape - Single concave throughout with pressed channels in the tips. Rocker is between 21 and 35mm depending on the size of the board. The outline is from many years of experience and feedback from big riders and light Winds especially in the Philippines.
The outline is broad keeping straight through 2/3rds and a slow taper past the feet. The “Edge Curve” technology is a release point at the very tips to make the board more forgiving when reaching and landing jumps.
The flex of the board is engineered. There is a bump in the middle of the board on the deck peak of the core thickness taper. This keeps the rocker flatter between feet while riding and focuses the flex in the tips where it belongs.
The shape of the board is designed for Light wind, Fast Planning and Upwind ability. The rails are thin and straight. This allows for maximum bite and edging, the surface area keep the speed and handling…